CD Clean Kit
(420-0225)                      MSDS                  Faxback Doc. # 2962

TAIWAN BOR YING CORPORATION
NO. 177-6 YU PIN LANE,
TU HSING RD., SEC. 3, TAIPEI HSIEN
TAIWAN, R.O.C.

                         MATERIAL SAFETY DATA SHEET
                         **************************

PRODUCT NAME: CD CLEANING KIT
NUMBER: 42-225
HAZARDOUS DESCRIPTION:

      HAZARD RATING      HEALTH:      FIRE:      REACTIVITY:
      0-LEAST      1-SLIGHT      2-MODERATE      3-HIGH      4-EXTREME

I - HAZARDOUS COMPONENTS

INGREDIENT                   CASE  NO.       %       HAZARD

IPA(ISOPROPYL ALCOHOL)       67-63-0         97.0%

---------------------------------------------------------------------------
II - PHYSICAL DATA

BOILING POINT:        82.40C DEGREE               PH:  NEUTRAL
SPECIFIC GRAVITY:     0.7863(20/20 C)             % VOLATILE: 100%
SOLUBILITY IN WATER:  SOLUBLE IN WATER FULLY      EVAPORATION RATE:(HO)>1
VAPOR DENSITY(AIR-1): 6.40
APPEARANCE:           CLEAR

---------------------------------------------------------------------------
III - FIRE AND EXPLOSION HAZARD DATA

FLASH POINT:  53.06F               EXPLOSION LIMITS
                                   LEL: 2%   UEL: 12%

EXTINGUISHING MEDIA: AS APPROPRIATE FOR COMBUSTIBLES IN AREA.

SPECIAL FIRE FIGHTING PROCEDURES:

ADDITION OF EXCESS WATER WILL EXTRACT ISOPROPYL ALCOHOL AND MAY FORM A
FLAMMABLE, SUPERNATANT LAYER.  MAY BE REQUIRED IF DRUMS RUPTURE AND
CONTENTS ARE SPILLED UNDER FIRE CONDITIONS.

USUAL FIRE AND EXPLOSION HAZARDS:

DRUMS MAY RUPTURE UNDER FIRE CONDITIONS.  DECOMPOSITION MAY OCCUR.

---------------------------------------------------------------------------
IV - HEALTH HAZARD DATA

EFFECTS OF OVEREXPOSURE

INHALATION:

    VAPOR IS HEAVIER THAN AIR AND CAUSES SUFFOCATION BY REDUCING OXYGEN
    AVAILABLE FOR BREATHING.  BREATHING HIGH CONCENTRATIONS OF THESE
    PRODUCTS CAN CAUSE LIGHT-HEADEDNESS, GIDDINESS, SHORTNESS OF BREATH,
    IRRITATION OF THE UPPER RESPIRATORY PASSAGES, AND MAY LEAD TO NARCOSIS,
    CARDIAC IRREGULARITIES, UNCONSCIOUSNESS OR DEATH.

EYES:

    ISOPROPANOL IS AN EYE IRRITANT.

SKIN:

    NOT A CORROSIVE OR IRRITANT AFTER SINGLE CONTACT; HOWEVER, REPEATED
    LIQUID CONTACT CAN CAUSE DEFATTING OF THE SKIN RESULTING IN IRRITATION.
    THIS MATERIAL IS POORLY ABSORBED THROUGH THE SKIN.

INGESTION:

    ALTHOUGH ORAL TOXICITY IS LOW.  INGESTION OF LIQUID IS TO BE AVOIDED.

EMERGENCY AND FIRST AID PROCEDURES

INHALATION:

     REMOVE TO FRESH AIR, CALL A PHYSICIAN, IF NOT BREATHING, GIVE
     ARTIFICIAL RESPIRATION, PREFERABLY MOUTH-TO-MOUTH.  IF BREATHING IS
     DIFFICULT, GIVE OXYGEN.  DO NOT GIVE OPINEPHRINE OR SIMILAR DRUGS.

EYES:

    IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR
    AT LEAST 15 MINUTES.  CALL A PHYSICIAN.

SKIN:

    FLUSH WITH WATER.  GET MEDICAL ATTENTION IF IRRITATION IS PRESENT.

INGESTION:

    NO SPECIFIC INTERVENTION IS INDICATED AS THE MATERIAL IS NOT LIKELY TO
    BE HAZARDOUS BY INGESTION.  DO NOT INCLUDE VOMITING AS THE HAZARD OF
    ASPIRATING THE MATERIAL INTO THE LUNGS IS A GREATER HAZARD THAN
    ALLOWING IT TO PROGRESS THROUGH THE INTESTINAL TRACT.

---------------------------------------------------------------------------
V - REACTIVITY DATA

STABILITY:  MATERIALS ARE STABLE.  HOWEVER, AVOID OPEN FLAMES AND HIGH
            TEMPERATURES.

INCOMPATIBILITY(MATERIALS TO AVOID):

    ALKALI OR ALKALINE EARTH METALS-POWDERED A1, Zn, Be, ETC.

HAZARDOUS DECOMPOSITION PRODUCTS:

    THE COMPONENTS OF THESE BLENDS CAN BE DECOMPOSED BY HIGH TEMPERATURES
    (OPEN FLAMES, GLOWING METAL SURFACES, ETC.)  FORMING HYDROCHLORIC AND
    HYDROFLUORIC ACIDS AND POSSIBLE CARBONYL HALIDES.

HAZARDOUS POLYMERIZATIONS:  WILL NOT OCCUR.

CONDITIONS TO AVOID:

1.  KEEP OUT OF REACH OF CHILDREN.

2.  AVOID TO INHALE, INGEST AND CLOSED TO EYES AND SKIN.
---------------------------------------------------------------------------
VI - SPILL OR LEAK PROCEDURES

KEEP AWAY FIRE, SKIN, EYES AND PREVENT INHALING AND INGESTING.

---------------------------------------------------------------------------
VII - WASTE AND DISPOSAL METHODS

SUGGEST TO THROW IT AWAY WITH PE BAG PACKAGE AND BUY NEW ONE FOR YOUR
EQUIPMENT.

---------------------------------------------------------------------------
VIII - EMPLOYEE PROTECTION

---------------------------------------------------------------------------
IX - OTHER INFORMATION