Deluxe Joystick  (260-0384) Using the Deluxe Joystick  Faxback Doc. # 14977
                         W/ Microsoft's Flight Simulator

To use the Deluxe Joystick with Micorsoft's Flight Simulator, begin by
putting the Deluxe Joystick in the calibration position (see "Putting the
Deluxe Joystick in the Calibration Position").  Then calibrate the Deluxe
Joystick for the Flight Simulator version (4.0 or 5.0) you are using.

PUTTING THE DELUXE JOYSTICK IN THE CALIBRATION POSITION

1.  Allow the Deluxe Joystick to return to the self-centered position,
    with both X and Y trimmers in the center position.

2.  Turn on the left or right throttle control and place it in its minimum
    position.

3.  Place the rudder control in its center position.

CALIBRATING THE DELUXE JOYSTICK FOR FLIGHT SIMULATOR 4.0

1.  Plug the Deluxe Joystick into port A of your game card.

2.  Type FS while in the subdirectory containing your Flight Simulator
    program.

3.  Type 2 and go through the No Questions Asked start-up routine.

4.  Press Enter when the software displays a Joystick Calibration screen.
    The Deluxe Joystick is ready for use.

Or use this alternate method:

1.  Plug the Deluxe Joystick into port A of your game card.

2.  Type FS while in the subdirectory containing your Flight Simulator
    program.

3.  Type 1 and go through the Start-up menus.

4.  After moving through the Mouse Selection Options, select the Joystick
    Selection Option and type Y.  Another Joystick Selection Option
    appears.

5.  Type C, then activate Stick A-One and Stick B-Throttle/Rudder.  The
    Deluxe Joystick is ready for use.

CALIBRATING DELUXE JOYSTICK FOR FLIGHT SIMULATOR 5.0

1.  Plug the Deluxe Joystick into port A of your game card.

2.  Type Setup.

3.  Go through the setup menus until you reach the joystick menu.  Type B
    for Aileron and Elevator, the type G for Throttle and Rudder.

4.  After the menus disappear, choose Run Flight Simulator.  The Deluxe
    Joystick is ready for use.

RECALIBRATING SOFTWARE IN FLIGHT

If your aircraft crashes, Flight Simulator takes another calibration
reading of the Deluxe Joystick.  If the Deluxe Joystick is in any position
besides the calibration position, it might not perform as intended.  For
example, if the Throttle Control is in the Maximum position when the
aircraft crashes, Flight simulator resets itself with the Throttle Control
in that position.  The Deluxe Joystick will not work correctly until it is
re-calibrated in the calibration position.

To recalibrate the Deluxe Joystick in flight while using Flight
Simulator 4.0:

1.  Place the Deluxe Joystick in the calibration position.

2.  Type 4 for the Simulator menu, then E for the joystick menu.  You are
    now in the Joystick Calibration menu.

3.  Type 1 until a cross appears next to the Joystick A-Yoke A option.

4.  Type 3 until a cross appears next to the Joystick B-Throttle/Rudder
    option.

5.  Type 4.  The Deluxe Joystick is calibrated.

NOTE:  Flight Simulator gives no indication that the Deluxe Joystick is
       now calibrated.

6.  Hit ESC twice.  The Deluxe Joystick is ready for use.

To recalibrate the Deluxe Joystick in flight while using Flight
Simulator 5.0:

1.  Place the Deluxe Joystick in the calibration position.

2.  Type O for the Options menu, then type P for the Preferences menu.

3.  Type J for Joystick, then type O for Joystick One.  Use the cursor
    keys to highlight Aileron and Elevator.

4.  Type W for Joystick Two and use the cursor keys to highlight Throttle
    and Rudder.

5.  Type R.  The Deluxe Joystick is calibrated.

6.  Press ENTER.  The Deluxe Joystick is ready for use.


(TE/all-04/26/95)