JP 500  (260-2950)            Setup Mode               Faxback Doc. # 15047

To enter the set-up mode on the printer, hold down the Economy/LQ key
while switching on the printer and the current settings will print out.
Make sure you have at least 4 pages worth of paper in the printer so that
the current settings and and changes you make can be printed on the paper.
DO NOT LOAD MORE THAN 15 SHEETS OF PAPER ON THE PAPER INPUT TRAY.  DO NOT
ALLOW MORE THAN 10 PRINTED SHEETS OF PAPER IN THE OUTPUT TRAY.  While in
set-up mode, a menu will print at the bottom of the current settings. The
menu reads like this:

Menu:    QUIT    Font   Paper   Char.set   Options   Printer

The print head will stop under the word "Font".

Using the panel keys to move the print head carriage along the group 
selection line, you can now select, change, and cornfirm the values you
require of the printer.

Form Feed - Moves the print head carriage to the left.
Economy/LQ - Moves the print head carriage to the right
On Line - Acesses the group/selects the value indicated by the position of 
          the print head.

The currently selected value for a group will have an asterisk (*) next to 
it.

To end the set-up mode, select "QUIT" in the group selection line and the
current settings will be printed to confirm any changes made.  A new menu
prints at the end of the new settings like this:

BACK to menu    QUIT & SAVE    RESET ALL & SAVE    EXIT (NO Save)

Any option you pick besides BACK to menu will return you to the On-Line 
mode.


(ABO/all-04/27/95)