JP-250
(260-2873)           Refilling Jet Cartridge          Faxback Doc. # 34140

Save money by refilling and reusing your empty ink cartdridges.  It's easy
- just follow the instructions, and in minutes, any spent cartridge is full
and ready to use again.  Specially designed for full compatibility with
Tandy and other quality printers.

1. Place the cartridge in the supplied refilling station.

2. Use the  supplied drill to make a hole in the well at the back of the
   cartridge.  Note:  Hole should be drilled in the TOP surface of the
   well, to prevent ink from draining out of the cartridge during normal
   use.

3. Insert the spout of one ink bottle into the hole.  Tip the bottle over
   and squeeze gently until ink bubbles to the top.

4. Wipe off any excess ink and replace the cartridge in the printer.
   Note:  To prevent spills, you may wish to seal the hole with a piece of
   tape before replacing the cartridge in the printer.

(/BKL-09/05/96)