DMP-137 (260-2887) Printer Layout Faxback Doc. # 4008 Layout of Printer Controls: ┌─── Paper Bail ┌── Parallel Port ┌── Paper ┌──┼───┬────────────────┴────────────────────────────────┬───┼──┐ Select │ │ │ ┌─┐ ┌─┐ │ │ │ Lever │ │ │ │o│ Push │o│ │ │ │ │ ┌┴┐ │ │o│ <─────────── Tractor ─────────────> │o│ │ │ ├──┐ │ │█│ │ │o│ Feed │o│ │ ┌┴┐ │──│ │ │ │ │ │o│ │o│ │ │█│ │──│ │ │ │ │ ┌─┴─┴─────────────────────────────────────┴─┴─┐ │ │ │ │──│ │ │ │ │ │ Platen │ │ └─┘ │──│ │ │ │ │ └─────────────────────────────────────────────┘ │ ├──┘─┐ │ └─┘ ├┐ ┌┤ │ │ │ ││─┐ ││──┐ │ Paper │ ├┘ │ ┌──┌▄─▄─▄─▄─▄─▄─┐ └│ │ │Adjust │ └──┼─────────────────────┼──┴────────────┴────────┘ │ │ Knob ┌─>│ │ │ ┌───┐ ┌───┐ ┌───┐ ┌───┐ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ └───┘ └───┘ └───┘ └───┘ │ │ │ └─────────┼─────────────────────┼───────────────────────────┼───┘ │ └── Color Ribbon │ └─────┬───────────────┘ │ │ Adjustment │ └── Control Panel │ └── Power Switch │ └──Print Head └── Dip Switch Location Adjust Lever Paper Bail Lever: Used to pull the paper bail forward. Pulling the paper bail lever forward will invoke the "automatic paper loading" function. The paper advances to 1/2 inch above the print start position. Pushing the paper bail back will retract the paper to the print start position. Paper Selector: Pull the paper selector forward to select tractor feed paper, or backward forsingle sheet paper. Power Switch: Rock the switch backward to turn ON the DMP-137. Rock the switch forward to turn OFF the printer. Control Panel: Four panel switches allow the user to custom configure the default setup of the printer and control paper loading/unloading. Faxback Document # 4009 will provide specific instructions on using the control panel. Color Ribbon Adjustment: Used to adjust the color ribbon tracking. If colors run together or the wrong color is printed, this adjustment will correct the print head/color ribbon alignment. Faxback Document # 4013 will give specific instruction on color ribbon adjustment. Paper Adjustment Knob: Used to make adjustments to the print start position. Clockwise to advance the paper, counterclockwise to retract the paper. Print Head Adjustment Lever: Used to change the distance between the print head and platen. Forward to increase the distance, backward to decrease the distance. Faxback Document # 4016 will provide a more detailed use of the print head adjustment lever. Dip Switches: IBM MODE EPSON MODE ┌───────────────┬────────┬─────────┬┬───────────────────┬────────┬────────┐ │ Switch │ ON │ OFF ││ Switch │ ON │ OFF │ │ │ │(Default)││ │ │ │ ├───────────────┼────────┼─────────┼┼───────────────────┼────────┼────────┤ │1 Emulation │ --- │ IBM ││1 Emulation │ Epson │ --- │ │ │ │ ││ │ │ │ │2 Character Set│ Set 2 │ Set 1 ││2 Character Set │Graphic │ Italic │ │ │ │ ││ │ │ │ │3 Page Length │ 12" │ 11" ││3 Page Length │ 12" │ 11" │ │ │ │ ││ │ │ │ │4 20 cpi │Invalid │ Valid ││4 1" Skip │ Valid │Invalid │ │ │ │ ││ │ │ │ │5 Automatic LF │CR=CR+LF│ CR=CR ││5 Automatic LF │CR=CR+LF│Autofeed│ │ │ │ ││ │ │ │ │6 USA / │Multi- │ USA ││6 Printer Data Flow│ Valid │Invalid │ │ Multi-Lingual│Lingual │ ││ Control (DC1/DC3)│ │ │ └───────────────┴────────┴─────────┴┴───────────────────┴────────┴────────┘ Faxback Document # 4007 will give detailed information on setting the dip switches. (dtc/tmc-09/06/95)