DMP-136  (260-2868)           Driver Emulations        Faxback Doc. # 4060

If you use software that lets you select any of the following printer
drivers, you can control most printing functions through the software:

* Tandy DMP-136
* IBM Proprinter III
* EPSON JX-80 with color support
* EPSON EX-800 with color support


DeskMate Drivers: DMP-135, DMP-136, and DMP-137

There is a color driver available from Computer Support Services for
DeskMate versions 3.0 and up.

Note: The DMP 135 is not a color printer, however, the driver will work 
      with the printer in Epson mode.

Note: In DeskMate 3.04 and 3.05, the DMP-135 and DMP-136 will be listed in
      the list of printers. However, in DeskMate versions before 3.04, the
      printers are not listed as part of the printer choices.

Note: Use the DMP-136 driver option for the DMP-137 printer.

The new drivers are easily installed, simply copy the files from disk to 
the DeskMate version 3.x hard drive directory, this will overwrite some of 
the existing printer drivers. (For a floppy version of DeskMate, copy the 
files to each disk.)

┌──────────────────────┐
│Selecting the Driver: │
└──────────────────────┘

You can make this driver your default driver by following these
instructions:

1. Select Setup from the Accessory Menu (F10)
2. Select the Printer Setting Option (F2)
3. Choose DMP135/136 in the Printers List box (DeskMate 3.04 and 3.05)
   * or choose IBMGRAPHIC (DeskMate 3.00, 3.02, and 3.03)
4. Choose any other applicable setting.
5. Press OK to save the new choice.


*Note: If the DeskMate version is prior to version 3.04, choose IBM 
       GRAPHICS as your printer driver. When the new driver is installed,
       it has the ability to check to see if your printer is set to color
       or not.

Note: Do not choose OTHER and use the DMPEIBMM.RES as this will give you an
      error message of INAPPROPRIATE PRINTER FILE.

(dtc-08/06/93)