LP 800  (260-2890)           PDL Menu Settings         Faxback Doc. # 4105

You can customize your printer's functions to meet your special needs. The
menu settings have three directories: MAIN, I/F, AND EMULATION (HPLJ3, IBM,
EPSON). When you install the optional PDL cartridge, the PDL menu also
appears. This section gives a brief explanation of each of the menu items
and their possible settings. The asterisk (*) indicates the factory setting
for a menu item.

┌────────────────────┐
│PDL Directory Menu: │
└────────────────────┘
┌────────────┬────────────────┬─────────────────────────────────────────────┐
│MODE        │ BATCH*         │ Selects the communications mode.             │
│            │ INTERACT       │                                             │
└────────────┴────────────────┴─────────────────────────────────────────────┘

┌────────────────┐
│Using the Menu: │
└────────────────┘
Menu settings are stored in the printer's memory even after you turn off
power and they remain unchanged until you reprogram them. Use the keys on
the operation panel to program the functions. The setting you can change
flashes on the display.

1. With the printer off line, press FUNCTION to enter the menu programming
   mode.
2. Press UP ARROW or DOWN ARROW so the directory name you wish to change
   flashes on the display.
3. Press SET to enter the menu select mode. The first menu item flashes.
4. Press UP or DOWN ARROW so the menu item you want to change flashes on
   the display.
5. Press SET to enter the change setting mode. The current setting flashes.
6. Press UP or DOWN ARROW until the setting needed flashes on the display.
7. Press SET to return to the menu select mode. The menu item flashes.

   If necessary, repeat Steps 4 to 7 to program other settings.

8. Press FUNCTION to exit the menu programming mode.
9. Press CONTINUE/RESET to store the new settings into memory.

Note: The PAPER SET, MANUAL FEED, and THICK PAPER functions become valid
without pressing CONTINUE/RESET. If you changed only these functions, you
do not need to press CONTINUE/RESET.

(smc-09/14/93)