DMP 250 (26-2886)          Control Panel Controls      Faxback Doc. # 4238

Shown below is the On Line Mode control panel switches:

                       ┌────────────────────────────┐
                       │                            │
                       │  ┌──────────────────────┐  │
                       │  │                      │  │
                     O │  │                      │  │
                     N │  └──────────────────────┘  │
                       │ ┌─┐  ┌─────────────┐       │
                     L │ │ │  ├  On Line   ─┤ ┌───┐ │
                     I │ │ │  ├─────────────┤ └───┘ │
                     N │ │ │  ├ Park/Load  ─┤ ┌───┐ │
                     E │ │█│  ├─────────────┤ └───┘ │
                       │ │█│  ├ LF/FF      ─┤ ┌───┐ │
                     M │ │█│  ├─────────────┤ └───┘ │
                     O │ │█│  ├ Quiet/Save ─┤ ┌───┐ │
                     D │ │█│  ├─────────────┤ └───┘ │
                     E │ │█│  └─────────────┘       │
                       │ │█│° Macro                 │
                       ┼─│█│° Setup           °Alarm│
                       │ │█│° Quick           °Power│
                       │ └─┘° On-Line ─┐            │
                       └───────────────┼────────────┘
                                       └ Current Selection

┌───────────────────────┐
│On Line Mode Switches: │
└───────────────────────┘

On/Off Line Switch - used to put the printer on line and off line.

Park/Load Switch   - used to perform three printer functions, Adjusting 
                     Top of Form, Perforation Tear Off, and Paper Parking.

   Faxback Document # 4227 will provide specific details on Adjusting the
   Top of Form.
   Faxback Document # 4226 will provide specific details on Perforation
   Tear Off.
   Faxback Document # 4229 will provide specific details on Paper Parking.

LF/FF               - used to advance the paper one line at a time. Pressing
                      and holding the LF/FF button will perform a form feed.

Quiet/Save          - used to place the printer in quite mode. Printing
                      speed decreases because the printer prints one line in
                      two passes.