DMP-133 
(260-2815)             Settings                       Faxback Doc. # 4295

The function switches can be found under the ribbon by opening the top 
cover.

DIP Switch Functions in TANDY MODE.
    (Switch 1 is set to OFF)

SW     Symbol           ON                 OFF
────────────────────┬──────────────────┬───────────────────────
1     Control Codes │                  │  Tandy Codes
                    │                  │
2     CR            │ Carriage Return  │  Carriage Return
                    │ Only (CR=CR)     │  and Line Feed
                    │                  │  (CR=NL)
                    │                  │
3     LF            │ Line Feed Only   │  Line Feed and
                    │ (LF=LF)          │  Carriage Return
                    │                  │  (LF=NL)
                    │                  │
4     Form Length   │ 12 Inches        │  11 Inches
                    │                  │
5     1-inch Skip   │ Valid            │  Not Valid
      Perforation   │                  │
                    │                  │
6     Line Spacing  │ 1/8 Inch         │  1/6 Inch
                    │                  │
7     Character Set │ IBM Character    │  Tandy Character
                    │                  │
8     WP/DP Mode    │ Word processing  │  Data processing
                    │ Mode             │  Mode

Switch 9 and Switch 10 select the interface and baud rate for serial
interface.
                                           Switch
     Interface        Baud Rate            9       10
─────────────────────────────────────────────────────────
    Parallel                              OFF      OFF
    Serial              600               OFF      ON
    Serial             1200               ON       OFF
    Serial             2400               ON       ON


DIP Switch Functions in IBM mode.
    (Switch 1 is set to ON)

SW     Symbol           ON                    OFF
─────────────────────┬────────────────────┬───────────────────
1     Control Codes  │  IBM Codes         │
2     CR             │Carriage Return     │ Carriage Return
                     │Only (CR=CR)        │ and Line Feed
                     │                    │ (CR=NL)
                     │                    │
3     LF             │Line Feed Only      │ Line Feed and
                     │(LF=LF)             │ Carriage Return
                     │                    │ (LF=NL)
                     │                    │
4     Form Length    │12 Inches           │ 11 Inches
                     │                    │
5     1-inch Skip    │Valid               │ Not Valid
      Perforation    │                    │
                     │                    │
6     Line Spacing   │1/8 Inch            │ 1/6 Inch
                     │                    │
7     Character Set  │IBM Character Set 1 │ IBM Character Set 2
                     │                    │
8     Buffer Full    │Carriage Return and │ Carriage Return
                     │Line Feed           │ Only

Switch 9 and Switch 10 select the interface and baud rate for serial
interface.
                                           Switch
     Interface        Baud Rate            9       10
─────────────────────────────────────────────────────────
    Parallel                              OFF      OFF
    Serial              600               OFF      ON
    Serial             1200               ON       OFF
    Serial             2400               ON       ON


(smm/tmc-12/02/95)