DMP-132  (260-2814)            Self-Test              Faxback Doc. # 4426

The DMP-132 has a built-in self-test feature to check the print quality and
general printer operation before you begin using it.

Before running the self-test, be sure to load the DMP-132 with 10-inch
paper since the test prints from one end of the platen to the other.

CAUTION: Printing on the platen can shorten the life of the platen and the
print head.

TO RUN THE SELF-TEST:

1. Press and hold either the LINE FEED or NLQ switch.  See "Printer
   Components."

2. Set the POWER switch to ON.  Starting with the sound of the internal
   buzzer, the DMP-132 will print the ASCII 96 characters preprogrammed
   into the printer.

If you press LINE FEED, the self-test is performed in the standard font.
The correspondence quality font is used during the test when the NLQ switch
is pressed.

Printing continues until you press the ON/OFF LINE switch or paper end is
detected.

(abo/BKL-01/16/96)