DMP 420 (260-1267) Control Codes Faxback Doc. # 4638 IGNORED CONTROL CODES ALL MODES: * Out of range on repeat sequence * Out of range on POS sequence * Redundant codes that don't change the current printer status. For example, if you send a CHR$(14) when underline is already set. DP MODE: 0, 1, 19, 30, 127, 255 WP MODE: 0, 1, 20, 127, 255, 2754 GRAPHIC: All codes in the range 0-127 are ignored except (10),(12),(27 14), (27 15),(27 16 n1 n2),(28 n1 n2),(30),(27 50),(27 51), and (27 52). Unprintable repeat sequence data n2 is also ignored. Codes printed as X in DP and WP Mode: * All codes from 0-31 and 128-159 except the active function codes or the above ignored codes. * Unprintable repeat data n2. * Standard,Compressed,Condensed if Switch #8 is OFF; codes 192-223 are printed as X. * Proportional or Correspondence, 192-254 are printed as X. CODE DEC. │DP MODE │WP MODE │GRAPHICS MODE │REMARKS ──────────┼─────────────────┼─────────────────┼─────────────────┼──────────── 00 │Ignored │Ignored │Ignored │ 01 │ │ │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 08 │Backspace │Backspace │Ignored │*** n │(n=Binary) │(n=Binary) │Receives n as │ │n;Backspaced │n;Backspaced │character data │ │dot number │dot number │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 10 │Executive Line │Full Line Feed │11/108" Line Feed│*LF/NL OR │Feed (Executive │(Executive) │(Executive)..... │selectable 138 │LF in accordance │ │8A hex. 138 dec. │*** │with information │ │ │ │latched) │ │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 12 │Form Feed │Form Feed │Form Feed │LF/NL │ │ │ │selectable ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 13 │Carriage Return │Carriage Return │Carriage Return │NL/CR or │(When NL,LF pitch│(When NL,LF pitch│only 0D Hex.(When│selectable 141 │is latched one) │is 1/6" per line)│NL,LF pitch is │ │ │ │11/108" per line │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 14 │End Underline │End Underline │Ignored │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 15 │Start Underline │Start Underline │Ignored │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 18 │Select Graphics │Select Graphics │Ignored │*Exchangeable │Mode │Mode │ │for another │ │ │ │code ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 19 │Ignored │Select DP Mode │Ignored │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 20 │Select WP Mode │Ignored │Ignored │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Proportional │Proportional │Ignored │*** 01 - 09 │Spacing (2nd byte│Spacing (2nd byte│ │ │is dot column #) │is dot column #) │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Start Elongation │Start Elongation │Start Elongation │Exchangeable 14 │ │ │ │for another │ │ │ │code ──────────┼─────────────────┼─────────────────┼─────────────────┼──────────── 27 │End Elongation │End Elongation │End Elongation │Exchangeable 15 │ │ │ │for another │ │ │ │code ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Positioning (3 │Positioning (3 │Positioning (3 │n1,n2: 16 │pitches are avail│pitches are avail│pitches are avail│Binary value n1 │-able)(n1,n2 indi│-able)(n1,n2 indi│-able)(n1,n2 indi│*** n2 │cate dot position│cate dot position│cate dot position│ │from Home pos.) │from Home pos.) │from Home pos.) │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Select Proportio-│Select Proportio-│Ignored │ 17 │al Character │al Character │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Select │Select │Ignored │ 18 │Correspondence │Correspondence │ │ │Character │Character │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Select Standard │Select Standard │Ignored │Exchangeable 19 │Character │Character │ │for another │ │ │ │code ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Select Condensed │Select Condensed │Ignored │Exchangeable 20 │Character │Character │ │for another │ │ │ │code ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Select Compressed│Select Compressed│Ignored │ 23 │Character │Character │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27,31 │Start Bold │Start Bold │Ignored │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │End Bold │End Bold │Ignored │Exchangeable 32 │ │ │ │for another │ │ │ │code ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27,52,n │Form Feed Set │Form Feed Set │Form Feed Set │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │1/12 Forward Line│1/12 Forward Line│1/12 Forward Line│ 50 │Feed │Feed │Feed │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │1/36 Forward Line│1/36 Forward Line│1/36 Forward Line│ 51 │Feed │Feed │Feed │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Set Full Reverse │Full Reverse Line│Ignored │ 10 │Line Feed (No │Feed (Executive) │ │ │motion) │ │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Set Half Forward │Half Forward Line│Ignored │Exchangeable 30 │Line Feed (No │Feed (Executive) │ │for another │motion) │ │ │code ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Set Full Forward │Ignored │Ignored │ 54 │Line Feed (No │ │ │ │motion) │ │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 27 │Set 3/4 Forward │3/4 Forward Line │Ignored │ 56 │Line Feed (No │Feed │ │ │motion │ │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 28 │Repeat Print Data│Repeat Print Data│Repeat Print Data│ n1 │(Undefined Code │(Undefined Code │(If MSB=0,Data is│ n2 │is changed to X) │is changed to X) │ignored.) │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 30 │Ignored │Ignored │End Graphic Mode │Exchangeable │ │ │ │for another │ │ │ │code ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 127 │Ignored │Ignored │Ignored │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── 255 │Ignored │Ignored │(Printing Data) │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── Other │Prints "X" marks │Prints "X" marks │Ignored │ Codes in │ │ │ │ Function │ │ │ │ Area(02 │ │ │ │ to 1F hex)│ │ │ │ ──────────┼─────────────────┼─────────────────┼─────────────────┼───────────── Other │Prints "X" marks │Prints "X" marks │(Printing Data) │ Codes in │ │ │ │ Function │ │ │ │ Area (80 │ │ │ │ to 9F hex)│ │ │ │ ──────────┴─────────────────┴─────────────────┴─────────────────┴───────────── * If Function Selection Switch 6 is set to OPEN, in line feed is performed at the same time. *** These codes may not be able to send to the printer by your computer. In this case, use system command to send them. NEW DMP-420 COMMAND CODES IF SWITCH #1 IS SET TO OFF, THEN THE FOLLOWING CODES ARE USED: OPERATION USE CHR$ () CODE: Start Graphics Mode 18 End Graphics Mode 30 Start Elongation Mode 27 14 End Elongation Mode 27 15 Standard Character 27 19 Condensed Character 27 20 End Bold Character 27 32 Half Reverse Line Feed 27 30 LINE PRINTER VI COMMAND CODES IF SWITCH #1 IS SET TO ON, THEN THESE CODES ARE USED: Start Graphics Mode 27 19 End Graphics Mode 27 20 Start Elongation Mode 31 End Elongation Mode 30 Standard Character 27 15 Condensed Character 27 14 End Bold Character 27 30 Half Reverse Line Feed 27 32 (smm 07/27/93)