Two-Button Mouse PS/2 (250-1042)       Setup           Faxback Doc. # 5437

If necessary, copy the two mouse drivers from your MS-DOS diskette to your 
working diskette or hard disk. The drivers are: MOUSE.COM and MOUSE.SYS

MOUSE.COM is the standard driver. To load it, it must be in your current 
directory or in a directory in your system's PATH. Simply type:

MOUSE [ENTER] (You can this in the AUTOEXEC.BAT file.)

MOUSE.SYS is the alternate device driver. If conforms to the DOS standard
for installable device drivers. To use MOUSE.SYS, add the following line to
your computer's CONFIG.SYS file:

    DEVICE=C\dir\MOUSE.SYS (dir is directory where you installed 
    MOUSE.SYS.)

For more information about CONFIG.SYS, AUTOEXEC.BAT, and PATH, refer to 
your DOS reference manual.

With some versions of MS-DOS, you can adjust your mouse's sensitivity and
set other mouse options. Refer to your DOS reference guide for specific
information on the mouse driver included with your system.

(dkh/tmc-10/06/95)