LP 8 (260-1168) Settings Faxback Doc. # 5825 The function switches can be found inside the printer behind the front panel control switches (ON-LINE / OFF-LINE, etc.). SETTINGS Power Switch ON OnLine/OffLine Switch to ONLINE Set Dip Switch (8 Position Switch) Dip Switch *=Standard Configuration (Parallel) (8 Position) ?=Does NOT Matter Serial Mode Only 1 ? OPEN 8 Bit Serial Interface CLOSED 7 Bit Serial Interface 2 ? OPEN 1200 BPS Serial Interface CLOSED 600 BPS Serial Interface 3 * OPEN Parallel Interface CLOSED Serial Interface 4 * OPEN CR Code Gives Carriage Return + Line Feed CLOSED CR Code Gives Carriage Return Only 5 * OPEN All CR Codes Received are Generated CLOSED CR Code After Initial CR Code is Ignored 6 OPEN LF Code Gives Line Feed Only * CLOSED LF Code Gives Line Feed + Carriage Return 7 * OPEN Normal ASCII Character at 91 - 95 Dec CLOSED Changed Over ASCII at 91 - 95 Dec 8 * OPEN European Symbol at 160 - 191 Dec CLOSED Japanese KANA at 160 - 233 Dec INTERNAL DIP SWITCH SETTINGS: ┌──────┬───────────────┬────────┬──────────┐ │SWITCH│ SYMBOL │ Off │ On │ ├──────┼───────────────┼────────┼──────────┤ │1 │ Serial Bit Set│ 8 │ 7 │ │2 │ Baud Rate │ 1200 │ 600 │ │3 │ Interface │ Paral. │ Serial │ │4 │ CR/NL │ CR │ CR+LF │ │5 │ CCR/CR │ Active │ CR │ │6 │ NL/LF │ CR+LF │ LF │ │7 │ Codes │ Tandy │ Ascii │ │8 │ Char.Set │ Europ. │ Kana │ └──────┴───────────────┴────────┴──────────┘ (smm 08/04/93)