255 MEG Smartdrive  (259-7120)        Settings         Faxback Doc. # 7051

This drive has a jumper block of 6 pins, located between the power
connector and the IDE interface connector.

   ┌─────────┐
   │ 5  3  1 │
   │ 6  4  2 │
   └─────────┘

┌─────────────────────┬───────────────┐
│Designation          │ Jumper        │
├─────────────────────┼───────────────┤
│Master (only drive)  │ all removed   │(default)
│Master (with slave)  │ 5-6           │
│Slave                │ 3-4           │
└─────────────────────┴───────────────┘

Note: For use with a 25-1095 adapter use master (only drive) jumper setting.

      Back of drive
          Top             531
 ┌─────────  ──────────┐ ┌───┐ ┌────┐
─┤:::::::::::::::::::::├─┤:::├─┼oooo┼
 └─────────────────────┘ └───┘ └────┘
  (pin 20 missing for     642  (4321)
   keying purposes)        ^
                           │   1 +12V
    Jumper Locations───────┘   2 GND
                               3 GND
                               4 +5V
(abo-07/30/93)