High-Performance Cone  (400-1270C)    Installation    Faxback Doc. # 14222
Tweeter

You can add the Tweeter to an existing speaker system, or incorporate it into a custom-built system.  Notice that by selecting different capacitor values from the table below, you can alter the Tweeter's low-end crossover point.

Mount the Tweeter so the back edge of the Tweeter basket is flush with the
front baffle of the speaker enclosure.  This will ensure optimal sound
dispersion.

  ┌─────────────┬──────────────────────┐
  │ Capacitor   │ Crossover Frequency  │
  ├─────────────┼──────────────────────┤
  │   2.2 ohms  │     6,000 Hz         │
  ├─────────────┼──────────────────────┤
  │   4 ohms    │     3,500 Hz         │
  ├─────────────┼──────────────────────┤
  │   6.8 ohms  │     2,500 Hz         │
  └─────────────┴──────────────────────┘

(ALL-03/16/95)