Musical Instrument Horn  (400-1228B)  Installation    Faxback Doc. # 14226
Tweeter

This Musical Instrument Horn Tweeter can be added to any existing 8 ohm
speaker system.  Be sure to use the cross-over capacitor supplied or low
frequency notes may damage the speaker.

The Tweeter does not need to be mounted inside an existing enclosure, nor
does it require specific baffling.  If you do mount it inside an
enclosure, position it so that the front edge of the horn is flush with
the front of the baffle board.  This will assure proper sound dispersion.

(ALL-03/16/95)