LV-20 Headphones
(330-1001)                  Specifications            Faxback Doc. # 14459

Frequency Response: ....................................... 20 - 20,000 Hz
Impedance: ...................................................... 150 Ohms
Sensitivity: .....................................95 dB SPL for 1 mW input
Maximum input: ................................................ 3.87 Volts
Distortion: ...................................................... < 0.5%

Cord: ....................... 8' flat, straight Y-cord with gold 1/4" plug

Dynamic Element: .................. 1.2 mm mylar diaphragms, 4-layer self-
                                       supporting aluminum voice coils and
                                   high energy anisotropic ferrite magnets

Resistance value of Volume Pot..............................1 kOhm +/- 10%

NOTE:  The volume pot is wired parallel with the headphones.

Specifications are typical; individual units might vary.  Specifications
are subject to change and improvement without notice.

(TLC/ir-01/25/96)