Stereo-Mate AM/FM  (120-0920)        Operation         Faxback Doc. # 14982
Headset Radio

1.  Turn VOLUME to its lowest position.

2.  Press POWER in to turn on the radio.

3.  Slide AM/FM STEREO to the desired band.

4.  Use TUNING to tune to the desired station.

5.  Adjust VOLUME to a comfortable level.

6.  Adjust BALANCE for the desired stereo effect.

7.  Press E-BASS in to emphasize bass sounds.  Press it again to turn off
    the radio.

8.  When you finish using the radio, press POWER again to turn off the
    radio.

NOTE:  Reception might vary as you move.

Your unit has an automatic FM stereo circuit.  When you tune to a stereo
broadcast, the tuning circuit automatically switches to stereo reception.
If the signal strength weakens during stereo reception, the unit
automatically switches to the monaural mode for improved sound quality.


(LB/all-04/27/95)