Mini Amplified Speaker  (320-2040)      Operation      Faxback Doc. # 15492

CONNECTING THE AUDIO SOURCE

The speaker has two input jacks - an auxiliary jack (AUX) and a mono
microphone jack (MIC).  You can use either input jack, or both at the same
time.  If you use both, the two audio signals are mixed in the speaker's
output.

CAUTION:  To protect your hearing and prevent damage to the speaker, always
          connect the speaker before turning on the audio source.

USING THE AUX JACK

To connect an audio source that has only a headphone output jack (such as
a portable radio or tape player), use shielded cords with 1/8-inch plugs
on each end (Cat. No. 42-2420).  To connect the audio source, plug one end
into the audio source's headphone jack.  Then plug the other end into the
speaker's AUX jack.

USING THE MIC JACK

To connect a mono microphone to the speaker, plug the microphone's 1/8-
inch plug into the speaker's MIC jack.

Follow these steps to use the speaker.

1.  Connect the speaker to power and the audio source.  (See "Connecting
    to Power" and "Connecting the Audio Source.")

2.  Turn on the audio source.

3.  To turn on the speaker, turn VOLUME/OFF clockwise until it clicks.

4.  Turn VOLUME/OFF to set the volume to a comfortable listening level.

5.  Turn TONE to adjust the high frequency sound.

6.  To turn off the speaker, turn VOLUME/OFF counterclockwise until it
    clicks.


(br/all-06/02/95)