AMX 20 Wireless Speakers  (400-1364)  Troubleshooting  Faxback Doc. # 15849

If you follow all the instructions, you should have no problems with your
AMX 20.  However, if you do have a problem, check the following table for
a solution.

┌─────────────────────┬───────────────────────────────────────────────────┐
│ Problem             │ Solution                                          │
├─────────────────────┼───────────────────────────────────────────────────┤
│ No Sound.           │ Be sure the speakers are turned on.               │
│                     │                                                   │
│                     │ Be sure the AC adapters are plugged in and have   │
│                     │ power.                                            │
│                     │                                                   │
│                     │ Be sure the audio source is turned on and         │
│                     │ operating.                                        │
│                     │                                                   │
│                     │ If you have connected to jacks that are controlled│
│                     │ by the audio source's volume control, be sure the │
│                     │ source's volume control is turned up - to 1/3     │
│                     │ volume.                                           │
│                     │                                                   │
│                     │ Adjust the speaker's volume control to midway.    │
│                     │                                                   │
│                     │ Adjust TUNING on the speakers until LED lights.   │
│                     │                                                   │
│                     │ Change the position of the transmitter.           │
├─────────────────────┼───────────────────────────────────────────────────┤
│ Distorted Audio.    │ Adjust TUNING.                                    │
│                     │                                                   │
│                     │ Change the position of the transmitter.           │
│                     │                                                   │
│                     │ Rotate FREQ ADJUST on the transmitter and then    │
│                     │ adjust TUNING until the interference goes away.   │
│                     │                                                   │
│                     │ Adjust LEVEL on the transmitter so the LEVEL      │
│                     │ indicator only flickers occasionally.             │
└─────────────────────┴───────────────────────────────────────────────────┘