PRO-100  (330-1145)             Troubleshooting        Faxback Doc. # 16040

If you follow all the instructions in this manual, you should have no
problems with your PRO-100.  However, if you do have a problem, check the
following table for a solution.

Problem                              Solution

No sound                             Be sure the headphones are turned on.

                                     Charge the headphones' battery pack.

                                     Be sure the AC adapter on the TX is
                                     plugged in and has power.

                                     Be sure the audio source is turned on
                                     and operating.

                                     If you have connected to jacks that
                                     are controlled by the audio source's
                                     volume control, be sure the source's
                                     volume control is turned up to 1/3.

                                     If the stereo indicator on the right
                                     earcup is not on, adjust TUN on the
                                     right earcup until it turns on.

                                     Adjust the headphones' volume
                                     control.

                                     Change the position of the
                                     transmitter.

Distorted audio                      If the stereo indicator does not
                                     light steadily, adjust TUN on the
                                     right earcup until it turns on.

                                     Rotate the FREQ ADJUST control on the
                                     transmitter and then adjust TUN on
                                     the right earcup until the stereo
                                     indicator on the earpiece lights
                                     steadily.

                                     Charge the headphone's battery pack.

                                     Change the position of the
                                     transmitter.

                                     Adjust the LEVEL control on the
                                     transmitter so the AUDIO LEVEL
                                     indicator only flickers occasionally.


(llg/all-07/20/95)