STA-235  (310-2065)             Specifications         Faxback Doc. # 16061

AMPLIFIER

Audio Output Power at no more than:.................. 55 watts per channel
0.3% Total Harmonic Distortion                         (minimum RMS power,
into 8 ohms, over the audio spectrum,                both channels driven)
20 - 20,000 Hz.
RMS Power Output (@ 1000 Hz):..................... 70 watts at 1% THD, one
                                                   channel driven.
Frequency Response (1 watt, AUX In):........ 20 - 70,000 Hz + 1.5 dB,-4 dB
IM Distortion (40 watts, 70/7,000 Hz):.... Less than 0.3% (typically 0.1%)
Signal-to-Noise Ratio:......................... 65 dB (Phono), 80 dB (AUX)
Input Sensitivity:................................ Phono: Hi=6 mV, Lo=3 mV
                                                   AUX & Tape: 230 mV
Phono Equalization:......................................... RIAA +/- 2 dB
Tone Control Action:.............................. Bass: +/- 8 dB @ 100 Hz
                                              Midrange: +/- 6 dB @ 1.5 KHz
                                                Treble: +/- 10 dB @ 10 KHz
Harmonic Distortion (40 watts):.... 100 Hz=less than 0.15% (typical 0.03%)
                                     1 KHz=less than 0.15% (typical 0.03%)
                                     10 KHz=less than 0.3% (typical 0.08%)

FM TUNER

Sensitivity:............................................. 1.9 microV (IHF)
Limiting Sensitivity (-3 dB):.................................. 1.5 microV
Signal-to-Noise Ratio:...............................................70 dB
Capture Ratio:....................................................    2 dB
Total Harmonic Distortion (1 mV):.............. Mono = 0.2%; Stereo = 0.5%
Image Rejection:.................................................... 75 dB
IF Rejection:...................................................... 100 dB
Selectivity:........................................................ 75 dB
Separation at 1000 Hz:.............................................. 40 dB

AM TUNER
Sensitivity:....................................... Radiated: 250 microV/m
                                                          for 20 dB S+N/N)
                                                    Terminal: 20 microV
                                                          for 20 dB S+N/N)
Image Rejection:.................................................... 70 dB
IF Rejection:....................................................... 60 dB
AGC Figure-of-Merit:................................................ 45 dB
Total Harmonic Distortion (10 mV/m):................................. 0.8%
Signal-to-Noise Ratio (5 mV/m):..................................... 40 dB

POWER REQUIREMENTS
                                                 120 VAC, 60 Hz, 320 watts
                                                 (220/240 VAC, 50 Hz, for
                                                 European and Australian
                                                 models as indicated on
                                                 rear of unit)


(llg/all-07/21/95)