System 1230 Stereo  (130-1250)   Turntable Operation   Faxback Doc. # 16396
Rack System

During shipping, the turntable mechanism might have been disturbed.  If so,
the tone arm might not return to the arm rest or it might not complete the
automatic shut-off cycle.  To reset the mechanism, do the following:

1.  Unlock the tone arm from the arm rest.

2.  Manually turn the turntable clockwise and use the finger lift to move
    the tone arm toward the center spindle.  The auto mechanism clicks when
    it engages.

3.  While turning the turntable, let go of the tone arm.  It automatically
    returns to the tone arm rest.

    NOTE:  Be sure you have loosened the transit screws to release the
           turntable as instructed in "Setting Up the Turntable" (Faxback
           Doc. # 16392).

Follow these steps to use the turntable.

1.  Press POWER to turn on the system.  The indicator on the VOLUME knob
    lights.

2.  Press PHONO.  The PHONO indicator lights.

3.  Set the speed control to 33 or 45 for the type of record you are
    playing.

4.  Set the turntable speed adapter up for 45-rpm and down for 33-rpm
    records.

5.  Place the record on the turntable.

6.  Unlock the tone arm from the tone arm rest.

7.  Remove the stylus guard by pulling it away form the stylus.

8.  Lift the tone arm with the cue lever and move the tone arm toward the
    record.  The turntable's platter starts turning.

    NOTE:  The cue lever lets you move the tone arm up and down so you can
           play a section of a record or stop playing a record without
           turning off the turntable.

9.  Using the cue lever, gently lower the tone arm onto the record.  The
    system plays the record.

    When the tone arm reaches the end of the record, it automatically
    returns to the arm rest and the turntable stops.

10.  When you finish using the turntable, lock down the tone arm with the
     clamp to protect the stylus.


(ALL-08/09/95)