STA-100 Receiver  (310-2089)    Control Functions      Faxback Doc. # 16418

SELECTOR

Chooses one of five input positions.

   AM - Activates the built-in AM tuner.

   FM - Activates the built-in FM tuner.

PHONO - For any turntable equipped with a magnetic cartridge.

  AUX - For any high-output source - a second tuner, a crystal or ceramic
        phono cartridge, a second tape deck, TV, Ham radio, etc.

BASS

Controls low frequencies.  At the center position, it does not affect the
sound.  Turn clockwise to boost bass response, counterclockwise to de-
emphasize the low frequencies.

TREBLE

Controls high frequencies.  At the center position, it does not affect the
sound.  Turn clockwise to boost treble response, counterclockwise to de-
emphasize the high frequencies.

BALANCE

Adjusts balance of sound between left and right channels.  At the center
position (you'll feel a slight "catch" there) sound will be equal from both
channels.

VOLUME

Adjusts volume of sound from both channels - from MIN. to MAX.

Tuning Knobs

Tunes AM and FM stations.

SPEAKERS

  OUT - Turns all speakers off for private headphone listening.

    A - Connects main speakers only.

A REV - Reverse the left/right sound output from the "A" (or Main)
        speakers.

    B - Connects remote speakers only.

A + B - Connects main and remote speakers.

PHONES

Accepts any pair of low impedance stereo headphones.  The jack is always
"live".

POWER

Master Power ON/OFF.

FM 25 uS

(For USA/Canadian Models)
Converts Dolby FM signals into standard Dolby NR system for decoding by a
Dolby tape deck or decoder.  When listening to a non-Dolby FM signal (or if
you do not have a Dolby decoder), leave FM 25 uS button in out position.

HI FILTER

(For European and Australian Models)
The HI FILTER button lets you filter out noise.  When pressed in, the HI
FILTER removes hiss and scratches.

MUTE

Press this button is to eliminate interstation noise when tuning for FM
stations.  receiver will then be silent until you tune a strong (3 uV or
better) station.

Leave FM MUTE in out position to receive weak FM stations.

MONO

When pressed in, switches the amplifier and tuner from stereo to monaural
operation.  In the out position, the amplifier operates in stereo and the
FM tuner automatically switches to stereo when there is a stereo signal.

TAPE MONitor

Push in to play tapes or to monitor a tape as it is being recorded.

LOUDNESS

With the button in, boosts low and high frequencies to compensate for the
ear's reduced sensitivity to these frequencies at low volume levels.  With
button out, removes the compensation.

TUNING Meter

Indicates the relative strength of FM and AM signals.  tune for the highest
reading.

Indicator

As you turn the SELECTOR, an appropriate indicator lamp will light - AM,
FM, PHONO or AUX.  When you have tuned to a stereo FM station (with MONO
button out), the STEREO light will come on.


(ALL-08/10/95)