System 728 Mini  (130-1275)           Operation        Faxback Doc. # 16538
Stereo Component System

TURNING POWER ON/OFF

WARNING:  To protect your hearing, set VOLUME to MIN before you turn on the
          system.

Press POWER to turn on the system.  The STAND BY indicator turns off and
the indicator above CD, TUNER, TAPE, or AUX lights.

NOTES:  If the indicator above CD, TAPE, or AUX appears, CLOCK and the time
        appear on the display.

        If the indicator above TUNER appears, the AM or FM station
        previously selected appears on the display.

SETTING THE CLOCK

1.  If necessary, press DISPLAY so CLOCK and the time appear on the
    display.

2.  Press MEMORY. CLOCK flashes on the display.

    NOTE:  If you do not press TUNING down or up within 10 seconds after
           you press MEMORY, CLOCK stops flashing on the display.  Start
           again from Step 2.

3.  While CLOCK flashes, repeatedly press TUNING down to set the desired 
    hour.  If you press and hold down TUNING down, the hour advances 
    continuously.

    NOTE:  AM or PM appears when you set an AM or PM hour.

4.  While CLOCK flashes, repeatedly press TUNING up to set the desired
    minutes.  If you press and hold down TUNING up, the minutes advance 
    continuously.

5.  Press MEMORY again when you finish setting the time, or just wait 10
    seconds.

BASIC OPERATION

Follow these steps to operate your system.

1.  Press CD, TUNER, TAPE, or AUX to select the desired audio source.

2.  If you select TUNER, select the desired station (see "Using the
    Tuner").


(/all-08/16/95)