Stereo Dual Dubbing Cassette Deck with Dolby B/C NR
(140-0644)                 Connections                Faxback Doc. # 17573

LINE OUT Jacks

Connect to the TAPE IN or AUX IN jacks of your amplifier/receiver.

AMPLIFIER/RECEIVER

Using one of the patch cords provided, connect the left and right LINE OUT
jacks to the corresponding TAPE IN or AUX IN jacks of your 
amplifier/receiver.

LINE IN Jacks

Connect to the TAPE OUT jacks of your amplifier/receiver.  To activate
these jacks, set the INPUT selector switch to the LINE postion.

Use the other patch cords to connect the LINE IN jacks to the TAPE OUT 
or RECORD OUT jacks of your amplifier/receiver.  Plug the power cord 
into an AC outlet.

INPUT Selector Switch

Set to the appropriate input position (LINE or MIC) when recording.

AC Power Cord

Plug this cord into a standard AC outlet or the amplifier/receiver's
convenience AC outlet.

STEREO HEADPHONES 

You can use stereo headphones to monitor the recording process and signal,
or to listen to a tape being played back.  This gives you complete private
monitor/listening capability.  Connect them to the stereo PHONES jack.

MICROPHONES

For live recording, connect microphones to the MICROPHONES jacks.  Use two
microphones for stereo recordings; for monaural recordings, use a
Y-connector available at Radio Shack and one microphone.  To obtain the
greatest quality of sound, use only high-quality microphones.


(PH 10/30/95)