Realistic Stereo-Mate AM/FM Headset Radio
(120-0104)                 Operation                  Faxback Doc. # 18172

1.  Turn VOLUME to its lowest position.

2.  Slide ON/OFF to ON.

3.  Slide AM/FM to the desired band.

4.  Tune to a station using the TUNING control.

5.  Adjust VOLUME to a comfortable level.

6.  Adjust BALANCE for the desired stereo effect.

7.  When finished with using the radio, set ON/OFF to OFF.

NOTE:  Reception might vary when in motion because of the built-in
       antennas.

This unit has an automatic FM stereo circuit.  When tuning to a stereo
broadcast, the tuning circuit automatically switches to stereo reception. 
If the signal strength weakens during stereo reception, the unit
automatically switches to the monaural mode for improved sound quality.

ADJUSTING THE HEADBAND

Adjust the radio's headband for a custom fit.

Firmly grasp the headband's center section and slide each side in or 
out to obtain the proper fit.


(cd 10/17/95)