Chronomatic 3 AM/FM 2 Band Clock Radio
(120-1485)                 Operation                  Faxback Doc. # 18720

1.  Connect the power plug to an AC 117V, 60Hz outlet.

2.  Set the correct time 

    Set the electric clock to the correct time by pulling the time set
    knob on the back of the radio outward.  Turn it clockwise until the
    correct time is indicated.  The full feature Telechron Clock with
    luminescent dial makes it easy to see the time even in the dark.

3.  Operation of the clock switch

    The clock switch has four control positions, "Alarm"..."AUTO"...
    "OFF"..."ON" from lower to upper position in order.  Operations for
    respective control positions are as follows:

    "OFF" position      Only clock operates

    "ON" position      Radio operates

    "AUTO" position

    Before retiring, tune in your favorite station and adjust the volume
    control to a suitable listening level.  To set the alarm, push in the
    time set knob on the back of the cabinet.  Turn it clockwise until the
    hand is pointing to whatever time you wish to wake up.  Then turn
    Clock switch so it points to AUTO.  The radio will automatically go on
    at the time shown by the alarm hand.


(br/SP-1/2/96)