REALISTIC Stereo Three AM/FM Radio
(120-1451)                 Specifications             Faxback Doc. # 18908

AM Section

Frequency Coverage:.........................................520 to 1600 kHz
Intermediate Frequency:.............................................455 kHz

FM Section

Frequency Coverage:...........................................88 to 108 MHz
Intermediate Frequency:............................................10.7 MHz
Sensitivity:.............................................8 microV or better
Stereo Separation:...............................28 dB or better at 1000 Hz

Audio Section

Output Power:.........................................2.5 watts per channel
Frequency Response:.........................................50 to 15,000 Hz
PHONO & TAPE Sensitivity:............................................200 mv
Dimensions:....................................9 1/2 X 6-3/4" X 4-3/4 (hwd)
                                                             (each cabinet)

SERVICE MANUAL SPECIFICATIONS

Circuit:....................................AM/FM/MPX stereo radio receiver
                                          18 silicon transistors, 16 diodes
Frequency:................................................AM:520 - 1605 kHz
                                                          FM: 88 -  108 MHz
Intermediate frequency:...................................AM:455        kHz
                                                          FM: 10.7      MHz
Speakers:.......................................4" P.D. type 8 ohm (2 pcs.)
Power source:................................................AC 120 V 60 Hz
Tuning system:..........................................Vertical slide dial
Automatic Frequency Control (AFC):.................................Built-in
Antenna:............................................1.  Ferrite core for AM
                                                    2.  Line cord for FM
Stereo indicator:..................................................built-in
Controls:...................................1.  Selector - AM/FM/PHONO/TAPE
                                            2.  Balance
                                            3.  Tone
                                            4.  Volume with on/off switch
                                            5.  Tuning
External connection:.................1.  Speaker jacks
                                     2.  Phono jacks
                                     3.  Tape jacks
                                     4.  External antenna balanced 300 ohms
                                     5.  Headphones jack
Dimensions:
   Receiver:...........................9 1/2" (h) x 6 3/4" (w) x 4 3/4" (d)
   Speaker Box (2 pcs.):..............................each same as receiver
Weight:
   Receiver:......................................................4.85 lbs.
   Speaker Box:.............................................1.97 lbs. each.


(SP/all-02/08/96)