Chronomatic-209 (120-1498) Specifications Faxback Doc. # 18937 Bands AM:.......................................................535 - 1605 KHz FM:.........................................................88 - 108 MHz Semiconductors:..............................................10 Transistors 6 Diodes Power:.......................................120V AC, 60 Hz (240/220V 50Hz) Size:..........................................4" x 10 1/4" x 4 7/16" (HWD) Weight:............................................................2.9 lbs. ELECTRICAL SPECIFICATIONS AM SECTION General Standard output level is 50 mW, 400 Hz, 30% Mod. TEST ITEM UNIT NOMINAL LIMIT Frequency range kHz 525-1650 535-Max. 1605-Min. Intermediate frequency kHz 455 Sensitivity MicroV/m 450 900 20 dB quieting MicroV/m 700 1400 sensitivity Selectivity at dB 17 minimum input Harmonic distortion % 2 8 AGC figure of merit dB 40 Image rejection dB 30 25 ratio at 1400 kHz I.F. rejection dB 24 18 ratio at 600 kHz Output power mW 240 180 at 10% distortion Whistle modulation % 15 Max. @ 5 kmicroV/m (2nd) Frequency deviation kHz +/-35/=/-100 Max. @ 600. 1400 kHz Hum mod. 50 mW dB 38 output = 0 dB Vol. min. hum @ 50 mW output = 0 dB 40 output = 0 dB Bandwidth (-6dB) kHz 7 4-10 FM SECTION General Standard output is 50 mW, 400 Hz, 22.5 kHz dev. Frequency range MHz 87-109 88-Max. 108-/Min. Intermediate frequency MHz 10.7 Sensitivity microV 15 (22.5 kHz dev.) 30 dB quieting microV 20 35 sensitivity (22.5 kHz dev.) S/N ratio dB 38 30 Image rejection ratio dB 25 20 at 106 MHz I.F. rejection dB 50 40 ratio at 90 MHz ACA 400 kHz dB 20/20 7/7 3 dB limiting point microV 250 Harmonic distortion % 2 8 Frequency deviation @ MHz +/-1.5 MHz 92/104 MHz Hum mod. 50 mW dB 38 output = 0 dB Vol. min. hum @ dB 40 50 mW output = 0 dB (/all-02/09/96)