ICF-C6000 AM/FM Clock Radio
(120-1606)                 Operation                  Faxback Doc. # 19755

SETTING THE CLOCK

1.  Plug in the Clock Radio.

2.  Open the lid.

5.  Close the lid.

3.  While press CLOCK, press H to set the hour.  While pressing CLOCK,
    press M to set the minute.

4.  Release CLOCK.  The clock will begin to operate and the display will
    change to the alarm time.

NOTES:  Each time you press H or M, the digit advances one at a time.

        The minute digits advance to "00" after "59".

        The hour digits do not advance by pressing M.

        While the lid is open, the alarm time is displayed.  After setting
        the lock, be sure to close the lid to display the present time.

To adjust the time exactly to the second

Please CLOCK simultaneously with the radio and telephone time signal.

LISTENING TO THE RADIO


1.  Set the function selector to radio.

2.  Adjust the volume.

3.  Set the AM/FM band selector AM or FM.

4.  Tune in to the desired station.

To stop the radio Set the function selector to off.

To improve the radio reception

FM: Extend fully and            AM: Rotate the Clock Radio
    adjust the direction            horizontally.
    of the AC power cord.

SETTING THE ALARM

For the radio alarm, tune into the desired station and adjust the volume
in advance.

1.  Open the lid.

2.  Press it to set the hour.

3.  Press M to set the minute.

4.  Close the lid to display the current time.

5.  Set the function selector to radio or alarm.

NOTES:  Be sure to close the lid after completing the alarm time setting.
        Otherwise, the alarm time will be kept displayed and the present
        time will not be displayed.

        When you set the function selector to radio, be sure to adjust
        the volume at your desired level before you go to bed.

At the preset time

The desired alarm sound (radio or melody) will be heard and stops
automatically after 119 minutes.

To snooze for a few more minutes

Press SNOOZE/SLEEP OFF.  The alarm sound stops, but will automatically
be heard again after about nine minutes.  You can repeat this snooze
function as many times as you like.

To completely stop the alarm

Set the function selector to off or radio.  To set the alarm time to the
same time again, set the function selector to radio or alarm.

The volume of the alarm sound

The radio volume can be adjusted.  The melody volume is fixed.

To check the alarm time

Open the lid to display the alarm time.

SETTING THE SLEEP TIMER

You can go to sleep while listening to the radio.

1.  Set the function selector to snooze, radio, or alarm.

2.  Press SLEEP button.

NOTE:  When you press SLEEP button, the radio turns on, and automatically
       turns off after 59 minutes.

       Press SNOOZE/SLEEP OFF to turn off the radio before the preset
       time.

NOTES:  Every time SLEEP button is pressed, "0.59" is displayed and the
        sleep timer is reset to 59 minutes.

        If you have set the function selector to radio or alarm, you will
        be able to wake up to the sound of the alarm after the sleep timer
        function has been activated.

Power Backup During Power Failure

We recommend you to install the 6F22 battery (not supplied) for the power
backup function.  If the AC power supply is interrupted, the battery will
supply power to keep the clock operating and holding the alarm time
setting.

During a power failure, the clock function will be maintained although the
illumination on the time display will go off, however the alarm sound will
not come on.

After a power failure, the displayed time may not always be correct (it
may gain or lose less than ten minutes per hour).

This battery is only for sustaining the clock operation and maintaining
the alarm memory during a power failure.  You cannot listen to the radio
with the battery.

When to replace the battery

To check the battery status, unplug the AC power cord from the wall outlet
and plug it in again after a few minutes.  If the displayed time is
incorrect, replace the battery with a new one.

CAUTION:  Be sure to install the battery before disconnecting the AC power
          cord.

          If the Clock Radio is to be left unplugged for a long period of
          time, remove the battery to avoid undue battery discharge and
          damage caused by battery leakage and subsequent corrosion.


(LB/all-03/01/96)