CD-3316 Portable AM/FM Stereo/Cassette/CD Player (140-0540) Hints and Tips Faxback Doc. # 19768 CD CARE TIPS Even though a compact disc is very durable, treat the CD surface with care. We recommend the following precautions. Do not place anything but a CD in the disc tray. This can damage the drive mechanism. Do not write on either side of the CD, particularly the non-label side. (Signals are read from the non-label side. Do not store CDs in high-temperature, high-humidity locations. The CDs might warp. Keep the CD dry. A water drop can act as a lens and affect the laser beam's focus. Always handle a CD by the edges to avoid fingerprints and always keep it in its protective case or sleeve when it is not in use. Fingerprints and scratches on the CD's surface can prevent the laser beam from correctly reading the digital information. To clean the CD surface, use a CD Cleaner Kit (such as Cat. No. 42-225). If you move the player from a very cold room to a warmer one, moisture can condense on the pickup lens, preventing proper disc play. If this happens, turn the CD player off then wait 2 hours before attempting to operate it again. TAPE CARE TIPS Preventing Accidental Erasure Cassette tapes have two erase-protection tabs - one for each side. To protect a recording from being accidentally recorded over or erased, use a screwdriver to remove one or both of the cassette tape's erase-protection tabs. NOTES: If you want to record over a tape side after you have removed the erase-protection tab, place a piece of strong plastic tape over that side's erase-protection hole. Be sure you cover only the hole originally covered by the erase-protection tab. Removing the erase-protection tabs does not prevent a bulk eraser from erasing a cassette tape. Erasing a Cassette Tape If you no longer want a recording, you can record over it or erase it. To erase a previously recorded tape, you can either: Record silence by setting RADIO CD OFF to TAPE or CD (with no CD loaded) and press DOT on the tape deck. Use a bulk tape eraser (such as Cat. No. 44-232, not supplied), not supplied), available at your local Radio Shack store. Restoring Tape Tension and Sound Quality After you play a cassette tape several times, the tape might become tightly wound on the reels. This can cause playback sound quality to deteriorate. TAPE CARE TIPS Preventing Accidental Erasure Cassette tapes have two erase-protection tabs - one for each side. To protect a recording from being accidentally recorded over or erased, use a screwdriver to remove one or both of the cassette tape's erase-protection tabs. NOTES: If you want to record over a tape side after you have removed the erase-protection tab, place a piece of strong plastic tape over that side's erase-protection hole. Be sure you cover only the hole originally covered by the erase-protection tab. Removing the erase-protection tabs does not prevent a bulk eraser from erasing a cassette tape. Erasing a Cassette Tape If you no longer want a recording, you can record over it or erase it. To erase a previously recorded tape, you can either: Record silence by setting RADIO CD OFF to TAPE or CD (with no CD loaded) and press DOT on the tape deck. Use a bulk tape eraser (such as Cat. No. 44-232, not supplied), available at your local Radio Shack store. Restoring Tape Tension and Sound Quality After you play a cassette tape several times, the tape might become tightly wound on the reels. This can cause playback sound quality to deteriorate. To restore the sound quality, fast-forward the tape from the beginning to the end of one side, then completely rewind it. Then loosen the tape reels by gently tapping each side of the cassette's outer shell on a flat surface. CAUTION: Be careful not to damage the cassette when tapping it. Do not touch the exposed tape or allow any sharp objects near the cassette. (br-11/21/95)