AM/FM Bike Radio  (120-0453)        Operation          Faxback Doc. # 3675

MOUNTING THE BIKE RADIO

Choose a mounting location on the bike's handlebar where the radio does
not interfere with the bike's operation and the reflector is easily
visible.

1.  Use a Philips screwdriver to loosen the mounting bracket's screws
    and remove the lower portions of the brackets.

2.  Place the mounting bracket on top of the handlebar and the two lower
    brackets on the bottom.

3.  Hold the two portions together and thread a screw through each of
    the holes on the lower brackets, into the mounting bracket.  Then
    secure the screws with the Philips screwdriver.

USING THE RADIO

Follow these steps to use the radio.

1.  Turn VOLUME clockwise until it clicks to turn on the radio.

2.  Set BAND to FM or AM.

3.  Turn TUNING to the desired station.

4.  Adjust VOLUME to a comfortable listening level.

5.  Turn VOLUME counterclockwise to OFF to turn off the radio.

USING THE HORN

You can sound the horn even when the radio is on.  To sound the horn,
press the orange button on the front panel.

(br/all-12/19/94)