AM/FM Portable Radio  (120-0726)      Power            Faxback Doc. # 3856

USING BATTERIES

You can power the radio from four C batteries.  We recommend alkaline
batteries, such as Cat. No. 23-551.  Follow these steps to install the
batteries.

1.  Remove the battery compartment cover by pushing in the cover's two
    tabs and then pulling the cover in the direction of the arrows.

2.  Install four C batteries (not included) in the lower level of the
    compartment, as indicated by the polarity symbols (+ and -) marked
    inside the battery compartment.

3.  Replace the battery compartment cover.

4.  Set AC/DC to DC.

Caution:  Remove batteries if you do not plan to use the radio for a week
          or more, or if you use AC power.  Old or weak batteries can leak
          chemicals and damage the radio.

Note:  When the sound becomes weak or distorted, replace the old batteries
       with fresh ones.

USING AC POWER

You can power the radio from standard AC power.  Follow these steps to
operate the radio using AC power.

1.  To remove the battery compartment cover, push in the cover's two tabs
    and then pull the cover down in the direction of the arrows.

2.  Pull out the AC power cord from the upper level of the compartment.

3.  Route the power cord through the slot on the battery compartment cover
    and replace the cover.

4.  Set AC/DC to AC.

5.  Plug the AC power cord into any standard household AC outlet.

(br/all-12/28/94)