SCT-53  (140-0672)               Connections           Faxback Doc. # 3978

Connecting the Recording and Playback Cables

1.  Using one of the supplied audio cables, connect the cassette deck's
    left and right LINE OUTPUT jacks to the receiver/amplifier's left
    and right tape input jacks.

2.  Using the other audio cable, connect the cassette deck's LINE INPUT
    jacks to the receiver/amplifier's tape output jacks.

    Note:  If you are not sure which receiver/amplifier jacks to use,
           refer to your receiver/amplifier's owner's manual.

Connecting Power

Carefully check all connections.  Then plug the AC power cord into a
standard AC outlet.  The power cord's plug is polarized and fits only one
way.

Warning:  To prevent electric shock, do not plug the power cord into an
          extension cord or other receptacle unless you can fully and
          easily insert the plug's blades.

(br-01/17/95)