CD-6600 Compact Disc Automatic Changer
(420-5059)                  Editing                   Faxback Doc. # 32153

EDIT RECORDING

The CD changer can automatically select the tracks on a CD that will fit
on each side of a cassette tape (time edit), or you can program the tracks
you want to record (program edit).

TIME EDIT

1.  Select the disc number of the CD you want to record.

2.  Press EDIT on the CD changer.  EDIT flashes on the display.  Then,
    after a few seconds, PUSH EDIT and the following information
    alternately flash.

        DISC and the current disc number

        TRACK and the total number of tracks

        Total play time for the entire CD (in minutes and seconds)

3.  Use one of these methods to enter the total length of your cassette
    tape.

        Repeatedly press EDIT until the displayed time is closest to the
        length of your cassette tape.  Each time you press EDIT, the
        display changes:

          C--46

          C--54

          C--60

          C--74

          C--90

          C-- -- --

          If your cassette tape does not exactly match one of the
          displayed tape lengths, repeatedly press |<</<< or >>/>>| to
          select the correct tape length.  For example, if your cassette
          tape is 50 minutes long, repeatedly press EDIT until C--46
          appears, then repeatedly press >>/>>| until C--50 appears.

          Press EDIT, then enter the length (in minutes) of the cassette
          tape using the DISC SELECT number keys on the CD changer or the
          number keys on the remote control.  For example, if your
          cassette tape is 65 minutes long, press 6, then press 5 on the
          remote control.

4.  Load a cassette tape into your cassette recorder and set it to record.

5.  To record tracks onto one side of the cassette tape, press PLAY/PAUSE.
    PROG, SIDE A, and TIME EDIT appear on the display.  Then set your
    cassette recorder to record.

    The CD changer automatically selects the tracks on the CD that will
    fit on one side of the cassette tape, then displays the time of the
    tracks that will fit on the tape (first for Side A, then for Side B).
    Then the CD changer plays the tracks while the cassette recorder
    records the playback.  When the CD changer plays the last track that
    will fit on the first side of the cassette, it pauses playback.

    NOTES:  The CD changer pauses 8 seconds after you press PLAY/PAUSE to
            let the cassette recorder move past the tape leader.

            The CD changer automatically inserts a 5-second blank space
            at the end of each track.

            During time edit recording, only the DISPLAY, STOP, POWER,
            POWER/STANDBY and LOAD/EJECT keys work.

6.  When the CD changer pauses playback, turn the cassette tape over (if
    necessary) and set it to record again.

7.  To record tracks onto the other side of the cassette tape, press
    PLAY/PAUSE.

    The CD changer plays the remaining tracks while the cassette recorder
    records the playback.

    The CD changer automatically stops after playing back the last
    selection that will fit on the tape and displays the current disc
    number, category name (if any), and the total length of the music
    recorded onto the tape.

8.  Press STOP at any time to cancel time edit recording.

    NOTE:  The edit information you entered is still in memory.  To erase
           it, press STOP.

PROGRAM EDIT

Follow these steps to program the tracks you want to record.

1.  Follow Steps 1-3 under "Time Edit", above.

2.  Press MEMORY, SIDE A and EDIT appear on the display, and PROG.
    flashes.

3.  Repeatedly press |<</<< or >>/>>| to select the desired track.

4.  Press MEMORY.  The CD changer stores the track (for later playback),
    and the display shows the remaining time on Side A of the cassette
    tape.

5.  Repeat Steps 3-4 to program more tracks to record on Side A of the
    cassette tape.

    When the playback length of the displayed track exceeds the remaining
    time on Side A of the cassette tape, the time display blinks.  If
    this happens, either:

       Select a shorter track.

       Press MEMORY to end program edit for Side A of the cassette tape and
       start program edit for Side B. SIDE A on the display changes to SIDE
       B, and the CD changer automatically stores the displayed track to
       record as the first track on Side B of the cassette tape.

6.  Repeat Steps 3-4 to program more tracks to record on Side B of the
    cassette tape.

    When the playback length of the displayed track exceeds the remaining
    time on Side B of the cassette tape, ERROR appears.

7.  Load a cassette tape into your cassette recorder.

8.  To record tracks onto the current side of the cassette, press
    PLAY/PAUSE.  Then set your cassette recorder to record.

    The CD changer displays the time of the tracks that will fit on the
    tape (first for Side A, then for Side B).  Then the CD changer plays
    the tracks while the cassette recorder records the playback.  When
    the CD changer plays the last track you programmed for Side A, it
    pauses playback.

    When the CD changer pauses playback, turn the cassette tape over and
    fully rewind it (if necessary), then set it to record again.

9.  To record tracks onto the other side of the cassette, press
    PLAY/PAUSE.

10. Press STOP at any time to cancel program edit recording. 

    The CD changer automatically stops after playing back the last
    selection and displays the total length of the music recorded onto the
    tape.

    NOTE:  The edit information you entered is still in memory.  To erase
           it, press STOP.



(EB 4/22/96)
(BR 4/3/96)