System 730 Mini Stereo Component System
(130-1277)              Special Features              Faxback Doc. # 32561

SETTING A WAKE UP TIME

Like an alarm clock, you can set your system to automatically turn itself
on and play the last selected radio station, CD, or cassette tape.

1.  Press DISPLAY three times, TIME and the last-set wake-up time appear,
    and WAKE-UP flashes on the display.

2.  Within 5 seconds, press HOUR to change the hour setting or MINUTE to
    change the minute setting.

    NOTES:  When changing the hour, be sure to set it to the correct AM
            or PM hour.

            If TIME disappears before you finish setting the hour and 
            minute, start again from Step 1.

3.  To turn on the wake-up timer, within 5 seconds, press STEREO/MODE.
    WAKE-UP lights steadily on the display.

    NOTE:  If TIME disappears before you press STEREO/MODE, repeat Steps 1
           and 3 again.

4.  Select the desired radio station, CD, or cassette tape you want the
    System 730 to play when it turns itself on.

    NOTE:  If you selected a cassette tape, be sure to press PLAY and PAUSE
           on the appropriate deck (TAPE 1 or 2).

5.  Set VOLUME (or press VOLUME + or - on the remote control) to the
    desired listening level, and select the desired X-BASS and graphic
    equalizer settings.

6.  Press POWER to turn off the System 730.  STAND-BY/MUTE turns on, then
    the current time and WAKE-UP appear dimly lit on the display.

NOTES:  If you selected a cassette tape, be sure to release PAUSE on
        the selected deck after you turn off the system.

        To turn off the wake-up timer, repeat Steps 1 and 3.  WAKE-UP
        flashes then disappears from the display to indicate that the timer
        is turned off.

        Until you turn off the wake-up timer, the System 730 automatically
        turns itself on every day at the preset wake-up time and plays the
        last selected radio station or CD.  If no CD is loaded in the last
        selected CD position, the system automatically selects the next CD.

SETTING THE SLEEP TIMER

You can set the System 730 to automatically turn itself off up to 90
minutes from the time you set it.

1.  Press DISPLAY twice.  TIME and 00 appear, and SLEEP flashes on the
    display.

2.  Within 5 seconds, repeatedly press STEREO/MODE until the desired sleep
    time is displayed.

    The first time you press STEREO/MODE, SLEEP lights steadily and 90
    appears, indicating the System 730 is set to turn itself off in 90
    minutes.  Each additional time you press STEREO/MODE, the sleep time
    decreases by 10 minutes.

    NOTE:  If TIME disappears from the display before you finish setting
           the sleep time, repeat Steps 1-2 again.

3.  The System 730 remains on for the length of sleep time selected, then
    automatically turns itself off.

    To turn off the system before the sleep time has elapsed on the
    display, press POWER.

    To turn off the sleep timer and continue using the System 730, repeat
    Steps 1 and 2 and choose a sleep time of 00 in Step 2.

USING AN EXTERNAL MICROPHONE

The System 730 lets you connect and hear sound from an external microphone
combined with sound from the radio, a prerecorded CD or cassette, or an
additional audio source.

1.  Plug the microphone's 1/8-inch plug into MIC on the front of the System
    730.

2.  Start play on the audio source you want to accompany the microphone.

3.  Set VOLUME (or press VOLUME + or - on the remote control) to the
    desired level, and select the desired X-BASS and graphic equalizer
    settings.

4.  Speak or sing into the microphone to hear your voice combined with the
    sound from the selected audio source.

5.  To increase the volume of microphone's sound input, turn MIXING toward
    MAX.  To decrease it, turn it toward MIN.


(RMF/all-05/07/96)