Mini Stereo Amplified Speaker System 
(400-0168)                 Operation                  Faxback Doc. # 32649

NOTES:  Be sure the audio source's power is off and its volume control is
        set to its minimum level.

        If the audio source is stereo, the speaker with the built-in
        amplifier is the right speaker.

  1.  Insert the amplifier's 1/8 inch miniplug into your audio source's
      headphone jack.

  2.  Turn on the audio source and adjust the volume to a comfortable
      listening level.

  3.  Set BASS to IN for enhanced low-frequency response or to OUT for
      normal response.

  4.  Set TREBLE to IN for enhanced high-frequency response or to OUT for
      normal response.

  5.  Slide AMPLIFIER to ON to turn on the system's amplifier.  The red LED
      indicator lights.

      NOTE:  The system's volume varies with the audio source's volume
             level.  Use the audio source's volume control to set the
             volume.

  6.  To turn off built-in amplifier, slide AMPLIFIER to OFF.

  7.  To turn off the speaker system, turn off the audio source's power.

      NOTE:  If the audio source's output power does not exceed 500 mW,
             you can use the speakers with AMPLIFIER set to OFF. 
             Volume will be lower than if you used the amplifier.


(YO/EB 4/25/96)