MR3950 Personal Compact Disc Player 
(420-5050)                 Batteries                  Faxback Doc. # 33114

Using the battery

    Remove the battery cover.

    Insert 2 "AA" size batteries or their equivalent, observing the correct
    polarities (+ and -).

Note:  The use of regular batteries is not recommended for this unit as
       they have a short life.
       
       Alkaline batteries are recommended for longer consumption time.

Using Rechargeable Batteries

1.  Make sure to turn off the CD player by pressing stop/clear button twice
    and install the Ni-Cd rechargeable batteries into the battery
    compartment.  Be sure the polarity is correct.

2.  Connect the AC adapter's DC cable into the DC 3V input jack.

3.  Attach the adapter to a household AC outlet and turn on the
    rechargeable switch.

CAUTION!!  The Rechargeable switch should be in the on position only when
           rechargeable batteries are installed.  Use of the recharging
           circuit when standard or alkaline batteries are installed could
           result in damage to the player.

For rechargeable batteries:

    Batteries should be recharged for first time usage and/or after long
    periods of not being used.

    Batteries should be recharged for 8 hours to 9 hours for full capacity.

    The environment temperature for recharging process should be between 0
    degrees C to 40 degrees C.

    Normally, batteries can be recharged up to 300 times.

    While the batteries are being recharged, the unit can be played.


(WL/EB 5/14/96)