STAV-3000 AM/FM Stereo Receiver
(310-3008)                   Operation               Faxback Doc. # 34783


TUNING AM AND FM RADIO FREQUENCIES

MEMORY TUNING

The memory tuning feature lets you instantlytune to a frequency by
letting you store AM and FM frequencies in memory.

Each of the eight preset tuning buttons on your receiver is labeled with
two numbers.  The first number represents a memory location that can
store one AM and one FM frequency.  The second number represents a
memory location that can store a second FM frequency.  This means that
you can store up to 8 AM and 16 FM frequencies.

STORING AM FREQUENCIES IN MEMORY

1.  Press [POWER] to turn on the receiver.  Then, press [AM].

2.  Use manual or search tuning to select the AM frequency you want to
    store in memory.

3.  Press [MEMORY].  MEMORY appears on the display for about 5 seconds.

4.  While MEMORY is displayed, press the desired preset tuning button --
    [1/9] through [8/16].  The AM frequency is stored in MEMORY.

STORING FM FREQUENCIES IN MEMORY:

1.  Press POWER to turn on the receiver.  Then, press FM.

2.  Use manual or search tuning to select the FM frequency you want to
    store in memory.

3.  Press [MEMORY].  MEMORY appears on the display for about 5 seconds.
    While MEMORY is displayed do the following:
    For memories 1-8, quickly tap the desired preset tuning button --
    [1/9] through [8/16] -- to store the FM frequency.
    For memories 9-16, press the desired preset tuning button for 1 or 2
    seconds to store the FM frequency.

Repeat Steps 2  and  3  to store up to 15 additional FM frequencies.

NOTES:

   The receiver must display MEMORY before you can store a frequency.

   When you store a frequency in a memory that already has one, the old
   one is erased and replaced.

TUNING TO A STORED AM AND FM FREQUENCY

1.  Press [POWER] to turn on the receiver.

2.  Press [AM] or [FM].

3.  To tune to AM memory positions 1-8, press the desired preset tuning
    button -- [1/9] through [8/16].  The display shows the selected
    frequency.
    To tune to FM memory positions 1-8, quickly tap the desired preset
    tuning button.  For tuning to FM memory positions 9-16, press the
    desired preset tuning button for 1-2 seconds.  The display shows the
    selected frequency.

NOTE:  If your receiver is disconnected from AC power for more than 3
       days, it loses all the stored frequencies.


(IR-10/02/96)