System 713
(130-1260)                 Using the CD Player        Faxback Doc. # 7827

CD TIPS

Even though a compact disc is more durable than a record, you should
handle it with care.  Always hold the CD by its edge.  In extreme cases,
fingerprints and scratches on the CD's surface can prevent the laser from
correctly reading the digital information.

Always keep the CD in its protective case or sleeve when you are not using
it.

Keep the CD dry.  A water drop can act as a lens and affect the laser
beam's focus.

LOADING AND PLAYING A CD

Your CD player can play either 3- or 5-inch compact discs.

1.  Press CD.  The CD indicator lights.

2.  Press OPEN/CLOSE to Open the CD compartment.

3.  Carefully  place the CD label-side up in the recessed part of the
    compartment.

4.  Press OPEN/CLOSE to close the CD compartment.

The display shows the total number of tracks and CD's total playing time
in minutes and seconds.  The number of boxes on the display's right side
also indicates the number of tracks on the CD.

Caution:  Never force the CD compartment door to close.  You might damage
          the CD player's loading mechanism or the CD.

5.  Press PLAY/PAUSE to start track 1 and play all the tracks in order,>
    appears on the display, and the track number and the track's elapsed
    time appear in the window.  When each track ends, its numbered box
    disappears.

Notes:  You can press +10 to go to the beginning of the 10th track
        regardless of whether or not the disc is playing.

        Press PLAY/PAUSE to stop the CD temporarily.  A double bar appears
        on the display.  Press PLAY/PAUSE again to resume play.

6.  The CD stops automatically when it reaches the end.  Press STOP to
    stop playing the CD before the last track finishes.

7.  Press OPEN/CLOSE to open the CD compartment and remove the CD.

SEARCH

To search forward on the CD, press and hold SEARCH >> during play.  The
time counter advances, and you hear the CD at a faster speed and a lower
volume.  Release SEARCH >> to resume play.

To search backward on the CD, press and hold SEARCH << during play.  The
time counter reverses, and you hear the CD play backwards at a lower
volume.  Release SEARCH << to resume play.

SKIP

SKIP lets you quickly locate the beginning of any track on the CD.  You
can use SKIP before or during play.

Press SKIP >>| or |<< repeatedly until the display shows the number of the
track you want to play.  The CD player starts playing at the beginning of
the selected track.

Note:  If the disc is already playing, pressing SKIP |<< returns to the
       beginning of the current track.

RANDOM PLAY

Press SHUFFLE to listen to the CD tracks in random order.  SHUFFLE appears
on the display.

Press SHUFFLE again to stop random play.  SHUFFLE disappears from the
display.

INTRO

To listen to the first 10 seconds of each tracks, press INTRO while the CD
player is stopped.  When you hear a track you want to listen to, press
PLAY/PAUSE.

PROGRAMMED PLAY

You can program up to 16 racks on a CD to play in any sequence.

1.  Press STOP/CLEAR so the display shows the total number of tracks and
    the total playing time in minutes and seconds.

2.  Press PROGRAM.  PROGRAM and 00P-01, the memory location for the first
    programmed track, appear on the display.

3.  Press SKIP >>| or |<< to display the track number you want to program.
    (For example, if you cant to program track 2 into the first slot,
    press >>| twice.

4.  Press PROGRAM again to program the track and have the next memory
    location appear.

5.  Repeat Steps 3-4 for each track you want to program.

Notes:  If you program more than 16 tracks, you begin replacing the
        currently programmed tracks with the mew ones.

        After programming a track, press PROGRAM repeatedly to review the
        tracks you have already programmed.

6.  Press PLAY/PAUSE.  The CD player plays the tracks in the order you
    programmed.

Notes:  Press PLAY/PAUSE to temporarily stop the music.  Press it again
        to start from where you paused.

        Press STOP/CLEAR and then PLAY to start playing the sequence again
        from the beginning.

        Press SKIP >>| and |<< to move through the programmed sequence
        during play.

7.  To clear the program memory when the tracks finish playing, press
    STOP/CLEAR.  If tracks are still playing, press STOP/CLEAR twice.

REPEAT

To repeat the current track, press REPEAT during play so REPEAT appears
on the display.  When the current track ends, it plays again.

To repeat the entire CD, press REPEAT until REPEAT ALL appears on the
display.  When the CD reaches its end, the entire CD replays.

Note:  If you have programmed a sequence, REPEAT ALL replays your
       programmed sequence.

       To cancel repeat play, press REPEAT until REPEAT ALL disappears
       from the display.

TIME DISPLAY

Pressing DISPLAY during play shows you various pieces of information about
the tracks and playing time.  The original display shows the number of the
current track and the amount of time elapsed since the track began.

Pressing DISPLAY once shows the CD's remaining number of tracks and the
total remaining playing time.

Pressing it twice shows the total number of tracks and the total playing
time.

Pressing it three times returns to the original display.

(LB/all-10/21/94)