Chronomatic-304  (120-1604)         Operation          Faxback Doc. # 9496

SETTING THE CLOCK

1.  While pressing and holding down time, press and hold down hour until
    the clock displays the correct hour setting.

Note:  The PM indicator lights when you set a PM hour.

2.  While pressing and holding down time, press and hold down minute until
    the clock displays the correct minute setting.

3.  Release time.  The clock displays the current time.

ADJUSTING THE DISPLAY

Set dimmer high/low to high or low, depending on the amount of light in
the room.

PLAYING THE RADIO

1.  Set function to on.

2.  To play the radio, set radio/wave/train/water drop to radio.

3.  Set am/fm to am or fm.

4.  Rotate tuning to the desired station.

5.  Adjust volume to the desired level.

6.  When you are finished listening, turn off the radio by setting
    function to off.

Note:  The AM antenna is built-in.  Rotate the clock radio for the best
       AM reception.  For the best FM reception, fully extend the AC
       power cord.

USING THE SLEEP MACHINE

The sleep machine provides three different soothing sounds - waves, train,
and water drops.

1.  Set function to on.

2.  Set radio/wave/train/water drop to the sound you want to hear.

3.  Adjust volume to the desired level.

4.  To turn off the sleep machine, set function to off.

USING THE ALARM

You can set an alarm so the buzzer sounds, the radio turns on, or one
of the soothing sound effects plays at a specified time.

Setting The Alarm Time

1.  Set function to off.

2.  Press and hold down alarm.  The clock displays 12:00 (or the last
    alarm time you set).

3.  While holding down alarm, press and hold down hour until the clock
    displays the correct hour setting.

Note:  The PM indicator lights when you set a PM hour.

4.  While holding down alarm, press and hold down minutes until the clock
    displays the correct minute setting.

5.  Release alarm.  The clock displays the current time.

Note:  Press alarm to display the set alarm time.

Setting the Alarm to Sound

1.  Set function to either alarm or auto.

    Alarm-The buzzer sounds at the set alarm time.

    Auto-The radio turns on at the set alarm time if you set radio/wave/
    train/water drop to radio, or a soothing sound plays if you select
    wave, train, or water drop.

2.  Adjust volume to the desired alarm volume.

3.  At the set alarm time, the alarm sounds for about 1 hour and 59
    minutes.  To silence the buzzer, radio, or soothing sound, set
    function to off.

Notes:  To silence the alarm and have it sound again in 9 minutes, press
        snooze.  To cancel the snooze/alarm cycle, set function to off.

        Set function back to alarm or auto to set the alarm to sound at
        the same time 24 hours later.

USING THE SLEEP TIMER

You can set the radio or a soothing sound to play for up to 1 hour and  59
minutes, then automatically turn off.

1.  Set function to off.

2.  Press sleep.  0:59 briefly appears on the display.  The sleep timer
    automatically sets to 59 minutes.

    For a playing time of less than 59 minutes, while pressing and holding
    down sleep, press and hold down minute until the clock displays the
    desired setting.

    For a playing time of 1 hour or more, while pressing and holding down
    sleep, press hour.  The clock displays 1:59.  Continue to hold down
    sleep, then press and hold down minute until the clock displays the
    desired setting.

    When you release sleep, the clock displays the current time.

3.  Set radio/wave/train/water drop to the desired setting.

Press snooze to turn off the radio or soothing sound before the programmed
sleep time has elapsed.

(LB/all-01/18/95)