Component Stereo System  (130-1271)    Installation    Faxback Doc. # 9757

Notes:  Properly make all connections before you plug in and turn on the
        system.

        We recommend you place a cloth or other protection material under
        the system and the speakers when you place them on a desk or table
        with a oil or lacquer finish.

Connect the dipole antenna and fully extend it.

Plug the left speaker's wire into the SPEAKER L jack on the back of the
system.  Plug the right speaker's wire into the SPEAKER R jack.

Speaker Placement:  For the best stereo separation, place the speakers 5
to 10 feet apart, facing you, and as close to ear level as possible.

Connect optional equipment to the CD/AUX/PH jack on the back of the
system, if applicable.

Plug the AC power cord into a 120 VAC wall outlet.

Plug any optional equipment's AC power cords into the appropriate power
outlets.

Save the original packing material your system came in.  These materials 
provide the best protection for the system when it is moved or should it
become necessary to return it for service.

(LB-02/06/95)