SCT-55 (140-0674) Features Faxback Doc. # 9905 The Optimus SCT-55 High Speed Dubbing Stereo Cassette Deck combines two auto-reverse cassette decks for professional-quality dubbing and the convenience of extended play. Its features include: Computerized Sound - Improves the sound quality of tapes recorded Enhancement System using inferior recorders or inferior tapes. Auto Noise Reduction - Automatically selects the most appropriate System noise reduction system for playback. Auto Search Music System - Lets you quickly locate a selection. (ASMS) Dolby HX Pro System - Improves high-frequency response on all recordings: you can play back the tape on any player, even if the player does not have the Dolby NR or HX Pro system. Auto Tape Selector - Automatically adjusts equalization and bias to match the type of tape you use. Auto-Reverse - Lets you play or record (Deck 2 only) both sides of a cassette tape without turning over the cassette. Blank Skip - Skips long blank spaces on the tape. Repeat Play - Lets you repeatedly play two tapes for hours of continuous play. High-Speed Dubbing - Lets you copy tapes at twice the normal speed. CD-DECK Synchro-Start - Starts dubbing with the touch of a button. Dubbing Record Mute - Lets you record a few seconds of silence between selections. Auto-Stop - Protects the tape and the playback/record mechanisms by stopping playback or recording at the end of the tape. Logic-Controlled Operation - Gives you error-free, soft-touch control. Recording Level Control - Let you control the quality of your and Two-Channel Peak recordings. Level Meters Special Features Fast-Forward/Rewind - To rapidly advance or rewind the tape, press >> or <<. To stop the tape, press STOP. When the tape reaches the end, the cassette deck automatically stops. Pause - To temporarily stop Deck 2 during playback or recording, press PAUSE (||). To restart, press ||, >, or <. Note: You cannot pause while fast-forward or rewinding. Blank Skip - To have the cassette deck automatically fast- forward through blank spaces on the tape, set REV MODE to RELAY/SKIP. If the cassette deck encounters 15 seconds of silence, it fast- forwards to the end of the blank section and resumes normal play from the point. Tape Counter - As you play or record a tape, the tape counter advances. At the beginning of a tape or selection, press RESET to reset the counter to 0000. You can then use the tape counter to quickly locate a specific section on the tape. The counter can also show the elapsed time on a tape. To switch between displays, press TIME/COUNTER on the deck you are using. Automatic Search Music - The automatic search music system (ASMS) lets System you quickly locate a desired selection on a cassette tape. It searches for a blank space before a selection and automatically stops just before playback begins. ASMS operates only during play. If the cassette deck is stopped, first press > or <. To skip to the beginning of the current (or an earlier) selection: Press >> or << - whichever points in the same direction of the > or < indicator. To skip to the beginning of an earlier selection, repeatedly press the button. To skip to the beginning of the next (or a later) selection: Press >> or << - whichever points in the same direction as the > or < indicator. Note: If you press >> (or <<) more times than the number of selections on the side you want to search, the search continues of the other side. ASMS might not operate as expected if: The pause between selections is less than 4 seconds long. The overall recorded volume level of a selection is very low. The noise level between selections is very high. (LB/all-03/01/95)