Chronomatic-303  (120-1603)       Installation         Faxback Doc. # 9975

CONNECTING TO POWER

Plug the clock's power cord into a standard AC outlet.

12:00 flashes on the display until you set the time (see "Setting the
Time" found in Faxback Doc. # 9976).

Caution:  To prevent electric shock, the plug's blades are polarized and
          fit only one way.  If the plug will not fit easily turn it over
          and try again.  Do not force it.

INSTALLING A BACKUP BATTERY

You can install a 9-volt battery for back-up power.  We recommend an
alkaline battery, such as Radio Shack Cat. No. 23-553.

The backup battery powers the clock for at least 8 hours, and sounds the
alarm (at the set time) for at least 10 minutes.

Note:  To prevent unnecessary battery drain, be sure to plug the clock's
       power cord into a standard AC power outlet before you install
       the battery.

To install the battery, snap the battery terminals onto the terminal
contacts.  Then insert the battery into the compartment.

(LB/all-03/14/95)