Auto Stereo Power  (120-1869)       Features           Faxback Doc. # 14986
Booster

The Realistic AUTO STEREO POWER BOOSTER is designed to meet the needs of
value-conscious sound lovers.  It's compact, attractive, and easy-to-use.
And its circuitry is all solid state, including two high-powered ICs
selected specifically for rugged mobile application.  The AUTO STEREO POWER
BOOSTER adds great performance, extra features, and increased power output
to the stereo car radio or tape player.  You'll hear music at a more
enjoyable level and you'll probably hear some instrumentation you've missed
before.

It's easy to install the AUTO STEREO Power BOOSTER using the universal
mounting bracket provided.  For electrical power, use 12-volt, DC negative
electrical ground only.

Special Note:

This Booster is designed to be connected to radios/tape players that
incorporate BTL (Balanced Transformer-Less) or to common ground type.
(Many Boosters can not be connected to BTL-type circuits without damage).
However, it's vital that you identify input and output wires properly and
that you don't interconnect "ground" or "negative-side" speaker wires.  If
you aren't sure how to connect the Booster to your existing units, we
recommend strongly that you have your system installed by an experienced
electronics service technician.

WARNING:  The speaker installation must have a total power capacity of at
          least 40 watts program material.  For example, to use four 8-ohm
          speakers, each speaker must be rated for at least 10 watts
          program.  The high power levels produced by this Power Booster
          can damage low-wattage speakers.


(LB/all-04/27/95)