Auto Stereo Power (120-1869)       Installation       Faxback Doc. # 15022
Booster

Select a suitable mounting location.  It must be:

1.  Close enough to the radio or tape player so connections can be made.

2.  Close enough to a source of 12 volts DC so the power cable will
    reach.

3.  Convenient to use (easy to switch on and off as desired).  Remove the
    bracket from the Stereo Power Booster; use it as a template to mark
    mounting holes.  Then drill holes for the screws, taking care not to
    drill into existing wires or trim,.  Mount the bracket to the dash
    with two self-tapping screws.  Mount the Booster to the bracket using
    hardware removed previously.

WARNING:  This unit is designed for 12-volt, negative ground electrical
          system only.  Use with other voltages and grounding systems may
          result in damage.  If your vehicle does not provide 12 volts
          negative ground, ask your nearest Radio Shack about a convertor.

NOTE:  Booster Wiring Speakers--
       Left side White (Negative) Green (Positive)
       Right side Gray (Negative) Brown (Positive)


(LB/ir-09/18/95)