Trunk Mount Amplifier
(120-1975/A)               Operation                  Faxback Doc. # 17491

TURNING ON THE AMPLIFIER

Set your vehicle's ignition to the ON or ACC (accessory) position, then
turn on your stereo system.  The amplifier automatically turns on and the
POWER indicator lights.

CAUTION:  Do not listen at extremely high volume levels.  Extended, high-
          volume listening can lead to permanent hearing loss.

          Always start by setting the volume to the lowest level possible
          before you begin listening.

          Once you set the volume, do not increase it.  Over a period of
          time, your ears adapt to the volume level, so a volume level that
          does not cause discomfort might still damage your hearing.

NOTE:  After you make all the connections and reconnect the battery 
       terminal, remember to reset the vehicle's and radio's clock, the
       radio's digital tuner memories, and other timer/memory devices.

SETTING THE INPUT LEVEL CONTROL

LEVEL lets you adjust the level of the audio signals that enter the 
amplifier.  For the best performance, follow these steps to adjust the
input level.

1.  Using a flatblade screwdriver, turn LEVEL fully counterclockwise.

2.  Set the stereo's volume control to about one-third of its full range.

3.  Turn LEVEL clockwise until the stereo system's volume is at the maximum
    desired level.

4.  Adjust the stereo's system's volume control to a comfortable listening
    level.


(CS/all-10/23/95)