Car Stereo Frequency Equalizer 
(120-1962)                 Operation                  Faxback Doc. # 17952

TURNING ON THE EQUALIZER 

Depending on the power connection, your equalizer turns on when you turn on
the radio/cassette player or the ignition.  The lighted slide controls show
you when the equalizer's power is on. 

USING THE EQUALIZER'S SLIDE CONTROLS 

Be sure you set the radio/cassette player's treble and bass controls to the
center position.  Adjust the seven slide controls for the desired sound.
The center slide position provides a "flat" response for that frequency
range.  Press in the [EQ/DEFEAT] button to provide a "flat" response for
all seven bands. 

USING THE FADER CONTROL 

Use the FADER control to adjust the balance between front and rear
speakers.  Move the control up to increase the sound level of the front
speakers.  Move the control down to increase the sound level of the rear
speakers. 

USING THE RADIO/CD BUTTON 

Press the RADIO/CD button to the in position select the radio/cassette  
player as the program source.  Press the button to the out position to 
select a CD player as the program source. 

USING THE SUBWOOFER 60/100Hz BUTTON 

Use the SUBWOOFER [60/100Hz] button to select the desired low-pass  
frequency for subwoofer outputs. 


(CS/all-11/21/95)