Trunk Mount Amplifier
(120-1971B)                Mounting The Amplifier     Faxback Doc. # 18179

Follow these steps to mount the amplifier in the location you chose
earlier.

1.  Disconnect your vehicle battery's negative (-) cable.

2.  Label and Disconnect the amplifier's input and output wires to make
    mounting more convenient.

3.  Using the mounting holes on the amplifier as a guide, mark the
    locations for the mounting holes.

4.  Drill 9/64-inch holes in the marked locations, taking care not to
    damage anything behind the mounting surface.

5.  Attach the amplifier to the mounting surface using the supplied 
    sheet-metal screws and washers.

6.  Reconnect the amplifier's wires.

7.  Reconnect your vehicle battery's negative (-) cable.


(CS 10/10/95)